The Guru of 3D published a review on the MSI Radeon R9-290X Lightning
A quote from the article:
Bigger better stronger and faster, this review will cover the MSI Radeon R9-290X Lightning, this graphics card is considered the beast that rules them all ! With a PCB redesigned from ground up and usage of only the best components (high current chokes, International Rectifier PowIRstage, DirectFET chips, tantalum capacitors) MSI designed to design something really special. The factory overclocked product screams performance all over and with that TriFrozr cooler it is dressed to impress. The 2816 counting Shader processors based Hawaii chip will get paired with 4 GB GDDR5 memory running along a 512-bit memory interface. The card will clock towards 1080 MHz but is clocked at reference clocks on the GDDR5 memory. Hmmm, I just catch your attention ? Yeah I figured that much, let's go and check 'r out shall we ? So what does a Hawaii GPU bring into the garphics cards ? Oh what about 6 Billion transistors on a 438 mm2 Die, 512-bit Memory bus with 4 GB - 5.0 Gbps GDDR5 memory, Ultra HD ready, 5.6 TFLOPS of compute performance. Not bad for keywords, eh? AMD also has been focusing strongly at gaming in Ultra High Definition (UHD), so this will be a focus in our review as well. Will we be able to play the hottest games at that whopping 8.2 Mpixels at a 3840x2160 resolution @ 60 Hz.MSI Radeon R9-290X Lightning Review @ Guru3D
The product is fitted with the TriFrozr cooler which features a total of three fans. Two of the fans to the left and right are large 86mm black fans, while a smaller yellow 70mm fan rests right in the middle. The yellow fan also has a somewhat denser fin arrangement. The fans can be programmed independent from each other. For the heatsink itself MSI is using a large dual fin-stack heatsink connected to seven 8 mm-thick heat pipes. The card has a regular and a LN2 BIOS for liquid-nitrogen cooling based overclocking.