ViVo and voltage problem after Audigy 2 zx platinum pro inst
wow, 1000 registered. Would u like a pat on the back?.
This topic was started by VladimirRaver,
Pls help. I dont know what to do. I have asus gf fx 5900 card with vivo option, 2.4c HT enabled proc, asus p4c800 deluxe mobo. audigy 2 zx platinum pro sound, 2gb of ddr400 ram dual channel, cd rw, dvd. Everything worked great till i installed audigy card. After that when i tried to install capture driver it reported that device can not be started. When i connect composite cable to tv out PC freezes abd nscreen goes blank and i can not start pc until i change slot for sound card. IRQs are OK. Also my graphic card stopped working once (smart doc reported that). I rtied different driver versions of 4x.xx but the whole thing is not driver problem. Then i started smart doc and WHAT??? Agp bus voltage is 2.9 instead of 3.3, I checked the BIOS and i saw same value there. I have 400 watts PSU but... 2.9... Can this be a problem and how to solve it??? Big thanks in advance. I use PC a lot for work but now im afraid to turn it on. Any help is very appreciated. Im waiting...
Participate on our website and join the conversation
This topic is archived. New comments cannot be posted and votes cannot be cast.
Responses to this topic
Guys please help me... AGP voltage is 2.9. The normal is 3.3. Could this cause a problem. Someone must know this... Please read my post above... Thanks in advance
Ok, thanks man. I am gonna try that now. But i think that it is set to 3.3 if there is such setting. I will inform ASAP. Hope u will stay with me.
But in smart doc settings i found this: normal: 3.3 +- 0.49. Manual says the same. in BIOS there are VCORE, followed by 3.3, +5,+12,-12 voltages i think. Damn im confused now. I know about 1.5 but maybe this is something else. HELP!
that 3.3V u mean is something else then AGP Voltage
maybe its a software problem .... try reinstalling windows since the problems does not occure anytime just on that spezific things u mentioned ...
go backup with acronis true image or something equal and reinstall windows ... this helps in 90% of all cases ...
maybe its a software problem .... try reinstalling windows since the problems does not occure anytime just on that spezific things u mentioned ...
go backup with acronis true image or something equal and reinstall windows ... this helps in 90% of all cases ...
that 3.3V u mean is something else then AGP Voltage
maybe its a software problem .... try reinstalling windows since the problems does not occure anytime just on that spezific things u mentioned ...
go backup with acronis true image or something equal and reinstall windows ... this helps in 90% of all cases ...
maybe its a software problem .... try reinstalling windows since the problems does not occure anytime just on that spezific things u mentioned ...
go backup with acronis true image or something equal and reinstall windows ... this helps in 90% of all cases ...
I reinstalled windows 5-6 times in last two days Im experienced PC user I found at some other forums many people with same problem. Many of them were solved by installing a new PSU. Or by installing older capture driver first and then some other. AGP voltage is ok but 3.3 is required for agp to work and it is, again, 2.9 in my case which is too low. Im gonna try my graphic card in another PC but im sure it will work fine in some less loaded configuration. Damn... Continue to post pls. Everything u write or think can help. I repeat, i discovered that i am not the only one.
+3.3V = 28A
+5V = 40A
+12V = 17A
-12V = 0.8A
-5V = 0.3A
+5VSB = 2A
The problem is with +3.3V where i get in BIOS and smart doctor 2.9. I am waiting here for your help. Pls stay with me
The same is when i remove audigy It must be a low voltage problem... I pray God for it :)
+5V = 40A
+12V = 17A
-12V = 0.8A
-5V = 0.3A
+5VSB = 2A
The problem is with +3.3V where i get in BIOS and smart doctor 2.9. I am waiting here for your help. Pls stay with me
The same is when i remove audigy It must be a low voltage problem... I pray God for it :)
It is very important to mention this. In display settings in advanced controls in gf fx settings -where d3d, opengl and other setings are- there are no nview properties and on that picture on top of driver settings window it just says the name of card and the IRQ, and before, when it worked, there was something like this: tv encoder: philips and some number but u know what am i talking about. So that device is not working at all but im sure the cards is OK. Damn
28A is OK got this, too
I know what you mean but this has to say nothing ... I always had the TV Out chipset there but since ....... (I dunno) its not ... don't know why this is removed same with your VideoChip I think ....
and if we want to eliminate the Valtage thing first .... go and remove everythign from ur PC else the FX even remove 1GB RAM at this configuration there can't be a voltage problem ... what now ?
I know what you mean but this has to say nothing ... I always had the TV Out chipset there but since ....... (I dunno) its not ... don't know why this is removed same with your VideoChip I think ....
and if we want to eliminate the Valtage thing first .... go and remove everythign from ur PC else the FX even remove 1GB RAM at this configuration there can't be a voltage problem ... what now ?
Hey man u are helping me alot. im gonna remove sound and leave only one memory stick and im gonna remove dvd and cd drives. I ll be back here ASAP. But before i do this, could it be that my PSU has a failure??? Maybe i should try a different PSU, but in stores in my town i can not find a stronger one at the moment LOL. Damn i would be happy to get at least tv-out working :)
then don't buy it in your local store search the internet for seller ... my no name PSU works great ... only the -12V line is a bit low ....
so maybe ur PSU really does have some trouble ... lets see what happens if you disconnect everything ... and can't u burrow just a PSU from one of ur friends for testing
so maybe ur PSU really does have some trouble ... lets see what happens if you disconnect everything ... and can't u burrow just a PSU from one of ur friends for testing
HEY great!!! Listen, here is what i did: i put my card in less loaded friend's PC with worse PSU than mine. But 3.3 line vas 3.25 and guess what? When i installed driver in display properties i found tv encoder: philips bla bla bla.... but as soon as i conected my composite cable, the graphic card again turned off LOL Damn... I guess i eally need a new PSU. U think Thermaltake silent Purepower 580 W will do the trick? Amperages are higher than on my current PSU. Thanks for all your effort. We are on the way to solution. Pls stay with me. C ya later when i order and when i try something else
:) So 500+ will not damage anything? Damn... I'm much happier peson than i was two days ago:) So, thats it... I will notify u about everything when i get better PSU.
500+ OK?
500+ OK?
:P hehe U don't know how good I can understand you ...
I had some trouble with my new 120GB 7200.7 that cost me really much nerves ... the most important thing was ... my BIOS detected the HDD as CHS not as usuable LBA ... I would have never found that shit if I wouldn't be such a experienced PC user ... I just saw that 2nd boot screen with all devices and interups listed looked somehow strange ... did not know why then I said OK lets investigate this .... break-key ... huh whats that both 80GB are LBA and only the 120 CHS but both are 7200.7 ... strange and some other strange problems which are now fixed .... but the bad thing about that was ... everything worked ... I was able to do everything only the most important thing did not work ... just like ur problem ... everything works else TV ... thank god u saw that voltage thing .... I would have never said ... uuuu problem ... check ur voltage (in this case)
enough said ...... music ownz here got to make it louder and relax ... (Technics DJ Set Vol. 10)
I had some trouble with my new 120GB 7200.7 that cost me really much nerves ... the most important thing was ... my BIOS detected the HDD as CHS not as usuable LBA ... I would have never found that shit if I wouldn't be such a experienced PC user ... I just saw that 2nd boot screen with all devices and interups listed looked somehow strange ... did not know why then I said OK lets investigate this .... break-key ... huh whats that both 80GB are LBA and only the 120 CHS but both are 7200.7 ... strange and some other strange problems which are now fixed .... but the bad thing about that was ... everything worked ... I was able to do everything only the most important thing did not work ... just like ur problem ... everything works else TV ... thank god u saw that voltage thing .... I would have never said ... uuuu problem ... check ur voltage (in this case)
enough said ...... music ownz here got to make it louder and relax ... (Technics DJ Set Vol. 10)
LOL! :) :)
I ordered two PSUs LOL 480 and 580 watts (in case 580 is too much I just hope i will get them fast :)
I ordered two PSUs LOL 480 and 580 watts (in case 580 is too much I just hope i will get them fast :)
