Doubts AtlonXp on KT133 Mobo?
This is a discussion about Doubts AtlonXp on KT133 Mobo? in the General Hardware category; Hey, i have a soltek kt133 mb(SL-75V2 - X) and Duron850.Can i install AtlonXP1.5 on it? Or do i have 2 get new Mobo?. .
This topic was started by kyro, . Last reply by kyro,
Hey, i have a soltek kt133 mb(SL-75V2 - X) and Duron850. Can i install AtlonXP1.5 on it? Or do i have 2 get new Mobo?.
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Responses to this topic
Nope, all AthlonXP's need a 133mhz FSB, and only the kt133a and above can do that.
http://www.soltek.de/English/faq/CPU%20list/AMD.htm --> check out this comp list, as far as I can see, your mobo supports an AMD Athlon 1,4Ghz, but none of the XP processors. Too bad for you.
OP
OMG i m saved i have 256 MB PC133 SD ram.
The tommy guy from Soltek has given me further detailed instructions below is the quote from his both of his e-mails:-
First mail:-
"Dead Sir
If you want to support the maximum processor.Can you please you
refer to as below information.
1 SL-75kv2-x belongs to VIA kt133 chipset.So it only supports
100 Mhz FSB speed of AMD Athlon TB or Duron processor.
So includes the AMD Athlon XP or TB of 133Mhz FSB speed
processor.your motherboard can`t support it.
2 Up to now,the maximum processor could up to 1.4G(100*14) of
TB and 1.3G (100*13) of Duron (include MORGAN) processor.
3 Otherwise, you only need to set the SW1 on 100Mhz.and the bios will
automatic detected. But you need to check the motherboard
has the latest BIOS version (Q10).
Tommy(FAE Engineer)
Email :Tommy@soltek.com.tw "
OK ,I know he means "Dear sir" but thats quite a mispell :paranoid: .
Second Mail:-
Dear Sir
Continued to last time problem.
Please you careful check as below setting again.
1 Update bios to Q10.
2 Make sure the jumper setting.
SW1 OFF,ON,OFF,OFF,ON (100 Mhz FSB)
SW2 OFF.OFF,OFF,OFF (default)
Besides,he bios will automatic detected.
Tommy(FAE Engineer)
Email :Tommy@soltek.com.tw
(BTW he has spelled "Dear" correctly this time.)
sitting tight here. i m getting Athlon XP 1.5 ghz(open) @ Rs. 5,400 i.e $100 approx tommorow. that means i will report my mission status around 7.30 pm GMT 2 morrow.
see ya then.
KYRO;)
The tommy guy from Soltek has given me further detailed instructions below is the quote from his both of his e-mails:-
First mail:-
"Dead Sir
If you want to support the maximum processor.Can you please you
refer to as below information.
1 SL-75kv2-x belongs to VIA kt133 chipset.So it only supports
100 Mhz FSB speed of AMD Athlon TB or Duron processor.
So includes the AMD Athlon XP or TB of 133Mhz FSB speed
processor.your motherboard can`t support it.
2 Up to now,the maximum processor could up to 1.4G(100*14) of
TB and 1.3G (100*13) of Duron (include MORGAN) processor.
3 Otherwise, you only need to set the SW1 on 100Mhz.and the bios will
automatic detected. But you need to check the motherboard
has the latest BIOS version (Q10).
Tommy(FAE Engineer)
Email :Tommy@soltek.com.tw "
OK ,I know he means "Dear sir" but thats quite a mispell :paranoid: .
Second Mail:-
Dear Sir
Continued to last time problem.
Please you careful check as below setting again.
1 Update bios to Q10.
2 Make sure the jumper setting.
SW1 OFF,ON,OFF,OFF,ON (100 Mhz FSB)
SW2 OFF.OFF,OFF,OFF (default)
Besides,he bios will automatic detected.
Tommy(FAE Engineer)
Email :Tommy@soltek.com.tw
(BTW he has spelled "Dear" correctly this time.)
sitting tight here. i m getting Athlon XP 1.5 ghz(open) @ Rs. 5,400 i.e $100 approx tommorow. that means i will report my mission status around 7.30 pm GMT 2 morrow.
see ya then.
KYRO;)
